One Stop Training Solution
Over 50 Centres of Excellence
Late Availability Discounts

Domestic, Commercial and Industrial Electric Vehicle Charging Point Installers (EVSE) - City & Guilds Level 3 (2919-01)

Course designed to provide the required knowledge to install, inspect and test electric vehicle charging equipment.

€0.00*

Book now
...........................................

Course Details

Product number: DOM_COM_IND_VC|1824

This course is designed to provide expert guidance to those wishing to gain knowledge and understanding of Electric Vehicle charging including installation, inspection & testing and handing over of electrical vehicle charging equipment.

On successful completion of this course, you will qualify as an authorised installer on the Electric Vehicle Homecharge Scheme [OLEV] - registration required.

Course Book Required

Delegates will need the following book for this course:

  • Code of Practice for Electric Vehicle Charging Equipment Installation (IET Standards) - ISBN 978-1839531804

  • Legislation and regulations - key requirements relating to electric vehicle charging equipment
  • Overview of electric vehicle charging - modes and connections
  • Electrical installation requirements - earthing and supply arrangements
  • Installation of electric vehicle charging equipment - for domestic, commercial and industrial locations
  • Inspection, testing, commissioning and handover of electric vehicle charging equipment including DNO notification
  • Practical assessment - observation of inspection, testing and commissioning of an installation
  • Written theoretical assessment

This qualification is aimed at practicing electricians interested in understanding how to install the range of equipment and systems available, it covers the specialised installation requirements of electric vehicle charging equipment in public, private and commercial locations and includes exclusive guidance on electrical requirements.

Pre-Requisites

There are no formal entry requirements for this qualification, however delegates must be able to demonstrate the following competencies:

  • Be able to correctly install and terminate:
    • pvc/pvc cable (twin and earth)
    • Steel Wire armoured cable (swa)
  • Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork.

Note: These competencies are required for the assessment and are not taught as part of the course.

It is recommended that you are up to date with your 18th edition wiring regulations.


Delegates successfully completing this course will receive a City & Guilds 2919-01 Level 3 Award in Domestic, Commercial and Industry Equipment Installation certificate.

Assessment

Delegates will complete 2 forms of assessment on the last day of the course.

Please note: Mostly delegates will attend this course over 2 consecutive days, however in some circumstances delegates will be required to attend their exams and assessments on day 3. We will confirm the assessment day on your confirmation details. If you have a specific date you need please contact us on 0345 605 0006 prior to booking.

Delegates will complete:

  • Online Multiple Choice Exam (40 questions, 1 hour, open book)
  • Practical Assessments
    • Task A – Design 30 mins
    • Task B – Install 1 hour
    • Task C – Initial Verification 1 hour
    • Task D – Domestic Design 30 mins

You can bring your own tester in for the practical assessment as long as it complies to GS38.

Delegates must bring photographic ID such as a passport or driving license in order to sit the assessments on this course.

This course is designed to provide expert guidance to those wishing to gain knowledge and understanding of Electric Vehicle charging including installation, inspection & testing and handing over of electrical vehicle charging equipment.

On successful completion of this course, you will qualify as an authorised installer on the Electric Vehicle Homecharge Scheme [OLEV] - registration required.

Course Book Required

Delegates will need the following book for this course:

  • Code of Practice for Electric Vehicle Charging Equipment Installation (IET Standards) - ISBN 978-1839531804

  • Legislation and regulations - key requirements relating to electric vehicle charging equipment
  • Overview of electric vehicle charging - modes and connections
  • Electrical installation requirements - earthing and supply arrangements
  • Installation of electric vehicle charging equipment - for domestic, commercial and industrial locations
  • Inspection, testing, commissioning and handover of electric vehicle charging equipment including DNO notification
  • Practical assessment - observation of inspection, testing and commissioning of an installation
  • Written theoretical assessment

This qualification is aimed at practicing electricians interested in understanding how to install the range of equipment and systems available, it covers the specialised installation requirements of electric vehicle charging equipment in public, private and commercial locations and includes exclusive guidance on electrical requirements.

Pre-Requisites

There are no formal entry requirements for this qualification, however delegates must be able to demonstrate the following competencies:

  • Be able to correctly install and terminate:
    • pvc/pvc cable (twin and earth)
    • Steel Wire armoured cable (swa)
  • Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork.

Note: These competencies are required for the assessment and are not taught as part of the course.

It is recommended that you are up to date with your 18th edition wiring regulations.


Delegates successfully completing this course will receive a City & Guilds 2919-01 Level 3 Award in Domestic, Commercial and Industry Equipment Installation certificate.

Assessment

Delegates will complete 2 forms of assessment on the last day of the course.

Please note: Mostly delegates will attend this course over 2 consecutive days, however in some circumstances delegates will be required to attend their exams and assessments on day 3. We will confirm the assessment day on your confirmation details. If you have a specific date you need please contact us on 0345 605 0006 prior to booking.

Delegates will complete:

  • Online Multiple Choice Exam (40 questions, 1 hour, open book)
  • Practical Assessments
    • Task A – Design 30 mins
    • Task B – Install 1 hour
    • Task C – Initial Verification 1 hour
    • Task D – Domestic Design 30 mins

You can bring your own tester in for the practical assessment as long as it complies to GS38.

Delegates must bring photographic ID such as a passport or driving license in order to sit the assessments on this course.

Book Now Download PDF

No results founds

Please change date range and search again or speak to one of our agents on Live Chat